# Send an approval with attachments from a SharePoint list

> For the full documentation index, see https://250highstreet.com/llms.txt

> Send a Power Automate approval that carries the files attached to a SharePoint list item: get the file, pass its name and content, and link the item.

Short answer: an approval does not read a list item's files by itself. Your flow has to fetch the file first with the SharePoint actions Get attachments and Get attachment content. Then you pass the file's name and content into the attachment fields of the approval. Also add a link to the list item, so the approver can always open the full record.

## What happens

Someone adds a row to a SharePoint list and attaches a quote, an invoice or a photo. You build a flow with a "Start and wait for an approval" step. The approver gets the request, but the file is not in it. The approval only knows the fields you gave it: title, details, link and people.

The file is stored with the list item, apart from the columns. The flow must read it with its own actions and hand it over. For where those files live, see "[Where SharePoint list attachments are stored, and when to use a library](/guides/where-do-sharepoint-list-attachments-go/)".

## Signs this is happening to you

- The approval email has text but no file.
- Approvers reply "can you send me the quote?"
- The flow works for a list with no files, then fails when files are present.
- Someone approves without seeing the document.

## What the Microsoft pages say

Exact names may differ on your screens.

- On the SharePoint connector page, Microsoft says Get attachments "Returns the list of attachments for the specified list item." It adds that you can add a Get attachment content step and use the File identifier returned by Get attachments.
- The same page says Get attachment content "Returns file contents using the file identifier. The contents can be copied somewhere else, or be used as an attachment."
- The same page says "This connector supports list item attachment sizes up to 90 MB."
- Microsoft's page on approval flows with attachments uses Start and wait for an approval with the type Approve/reject - First to respond. It says: "Select Show advanced options to reveal the fields in which you'll provide information about the file attached to the request." The fields are Attachments Name - 1 and Attachments Content - 1. Microsoft's example shows only that type, so test the type you pick first.
- Microsoft lists this known limit: "Approvals with multiple attachments of the same name cannot be created. Attachment names need to be unique in order for Approval notifications to be sent."
- Microsoft says markdown "is supported for custom styling in the details field of approvals."
- Microsoft says approvers can respond "from their email inbox, the approvals center in Power Automate, or the Power Automate app."

## Before you start

You need a SharePoint list with attachments on, and a Power Automate account at [https://make.powerautomate.com](https://make.powerautomate.com). Check with your admin which license your team needs for approvals.

One setup note. Every list has a Title column. Rename it to something useful, such as the request name, or turn off Require. If the flow later updates the item, the Update item step asks for Title, so fill it from the trigger.

Say your list is "Purchase requests" with these columns: Title, Requester, Approver email, Amount (Number) and Status. Status is a Choice column with the choices 1 Submitted, 2 Approved and 3 Rejected. Set a default value of 1 Submitted, so a new row never has a blank status and drops out of your status views. The number prefix keeps your order, because a Choice column sorts by its text.

## Step 1. Start the flow when an item is created

Open [https://make.powerautomate.com](https://make.powerautomate.com) and start a new automated cloud flow. Choose the SharePoint trigger "When an item is created", then fill in the Site Address and List Name of your purchase list.

## Step 2. Get the attachments

Next, add the SharePoint action "Get attachments" and point it at the same site and list. Hand it the new item's ID from the trigger's dynamic content. You get back a list with one entry per attached file, each carrying a name and a file identifier.

## Step 3. Get the file content

For one file per request, add "Get attachment content" and set the site address, list name and item Id. For File Identifier, pick the Id of the attachment from Get attachments.

Our advice, not a Microsoft rule: if the form should only ever take one file, say so on the form and add a check that the count is 1, so the flow does not fail on empty or extra files. If requests can have several files, test how your approval step takes them before you build the rest, because the page above lists a Name field and a Content field and does not give a loop pattern.

## Step 4. Build the approval

1.  Add the approval action "Start and wait for an approval".
2.  Choose an Approval type. Microsoft's attachments example uses Approve/reject - First to respond.
3.  Title: pick the list item's Title.
4.  Assigned to: pick the approver email column.
5.  Details: write the amount and the requester, using the picker. You can format it with markdown.
6.  Item link: pick the link to the list item.
7.  Item link description: type "Open the request".
8.  Select Show advanced options. Set Attachments Name - 1 to the attachment's name, with its file extension, and Attachments Content - 1 to the output of Get attachment content. Microsoft says: "The file content needs to be binary encoded." Exact names may differ in the new designer.

If two files share one name, the approval cannot be created, so rename one before it is attached. Our advice, not a Microsoft rule: add the file name and size to Details as well, so the approver can see what to expect.

## Step 5. Act on the answer

1.  Add a Condition. Use the response from the approval, and test that it is equal to Approve.
2.  In the Yes branch, add SharePoint "Update item". Set Status to 2 Approved. Fill Title from the trigger.
3.  In the No branch, add "Update item". Set Status to 3 Rejected. Fill Title from the trigger.

Microsoft's tutorial uses the same shape: a Condition on the approver's response, then an Update item step in each branch, and it says the Site Address, List Name, Id and Title fields are required.

If you trigger on "item created or modified" instead, the Update item step changes the item and can start the flow again. Add a guard condition, such as Status is equal to 1 Submitted. See "[Power Automate flow keeps running itself over and over](/guides/power-automate-flow-triggers-itself-infinite-loop/)".

## Step 6. Test it

1.  Add a list item with a PDF attached.
2.  Open the run history and check that Get attachments returned one entry.
3.  Open the approval email, the approvals center or the app. Open the file.
4.  Reject one request and approve another. Check Status each time.
5.  Add an item with no file and see what the flow does. Fix it before real use.

## If you also want the files sent by email

Approvals and email are different actions. To send files in a normal email, see "[Email the files attached to a SharePoint list item](/guides/power-automate-email-list-item-attachments/)".

## Keep a record

Who approved and when matters later. See "[Keep an audit trail of every approval](/guides/approval-audit-trail/)". For the bigger picture, see "[Approvals lost in email: how to stop chasing sign-offs](/guides/approvals-lost-in-email/)".

## What to avoid

- Do not put the approval inside a loop over the files. You get one approval per file.
- Do not skip the item link. The approver may need other columns.
- Do not attach files above 90 MB. Link to them instead.
- Do not reuse a file name inside one approval.
- Do not rely on images in the details field. Microsoft's markdown page marks images as not supported in every client in its table.
- Do not treat a list view as security. Anyone with access to the list can open the files.
- Do not test only with a file you made in the same minute. Test with a real one.

## Honest limits

Markdown in Details can look different in each client. Microsoft's markdown page says "Markdown isn't currently supported for the Approvals app on Microsoft Teams." Guests may need to act on the approval in the Power Automate portal, as the connector page states for Outlook actionable mail. Labels in Power Automate get renamed now and then, so match each step by what it does, not by its exact name.

## When to get help

You can build all of this yourself in Microsoft 365. If you would rather have it built and tested for your team, I do that. A tracker like this is a fixed price: \$5,000 for one, built in 2 weeks. See "[What a SharePoint tracker costs to build](/guides/what-a-sharepoint-tracker-costs/)". Bring one example of the problem to a free call.

I am Al Davies. I run 250 High Street LLC and build SharePoint trackers and Power Automate flows for operations teams. I work remotely. The first call is free, and I will not try to sell you anything.

See trackers I built: [Tools I built](/portfolio/)

## FAQ

### Why does my approval email have no file?

The approval only holds what you pass into it. Get the attachment, get its content, and set the attachment Name and Content fields of the approval.

### How big can the file be?

Microsoft's SharePoint connector page says list item attachments are supported up to 90 MB. For a big file, send the Item link and leave the file on the list item.

### Can the approval carry a link to the file instead?

Yes. Point the Item link field at the list item, and the approver opens the file there. They need access to the site.

### What if two files have the same name?

Microsoft lists this as a limit: approvals with multiple attachments of the same name cannot be created. Rename one first.

### Where can the approver respond?

Microsoft says from the email inbox, the approvals center in Power Automate, or the Power Automate app.

## Sources

- [Microsoft Learn, SharePoint connector reference](https://learn.microsoft.com/en-us/connectors/sharepointonline/)
- [Microsoft Learn, Standard approvals connector reference](https://learn.microsoft.com/en-us/connectors/approvals/)
- [Microsoft Learn, Create and test an approval workflow with Power Automate](https://learn.microsoft.com/en-us/power-automate/modern-approvals)
- [Microsoft Learn, Use Markdown language to format Power Automate approvals](https://learn.microsoft.com/en-us/power-automate/approvals-markdown-support)
- [Microsoft Learn, Create approval flows with attachments](https://learn.microsoft.com/en-us/power-automate/approval-attachments)

## Related guides

- [Email the files attached to a SharePoint list item](/guides/power-automate-email-list-item-attachments/)
- [Document approval in SharePoint: built-in approval or a flow?](/guides/document-approval-sharepoint/)
- [My flow email goes out without the attachment](/guides/power-automate-send-email-with-attachment-not-working/)
- [How to lock a SharePoint list item after approval](/guides/lock-sharepoint-list-item-after-approval/)
- [SharePoint list attachments not showing](/guides/sharepoint-list-attachments-not-showing/)

Source: https://250highstreet.com/guides/power-automate-approval-with-attachments/